Comec ACF200-CNC: CNC Cylinder Boring and Resurfacing Machine

Comec ACF200-CNC: CNC Cylinder Boring and Resurfacing Machine

The Comec ACF200.CNC is the ideal CNC controlled resurfacing machine for modern engine rebuilders who are looking for technological development in their working solutions.

DESCRIPTION

The machining process of the Comec ACF200.CNC is completely managed by the numerical control system and represents an evolutionary leap in the automation of engine block boring and surfacing operations.

This state-of-the-art machine fully automates two critical operations for engine rebuild shops: cylinder boring and block surfacing.

Thanks to the perfection of numerical control, the ACF200.CNC offers excellent finishing results and precision.

This level of excellence is the result of a synergy between proven mechanical design and cutting-edge technological solutions that make this machine smart, fast and extremely practical to use.

The Comec ACF200.CNC offers an exceptional level of automation in the centering, alignment and surface scanning phases, as well as in the autonomous execution of the entire machining cycle.

Thanks to the numerical control system, the machine performs these operations fully automatically, eliminating the need for manual intervention by the operator.

In fact, once the engine block has been clamped, the operator’s only task is to enter the machining parameters via the convenient and intuitive touch-screen control panel.

The ACF200.CNC offers maximum customization with a choice of three optional boring spindles that cover a wide boring range from Ø 35÷170 mm, depending on the specific work requirements.

The Comec ACF200.CNC is the ultimate choice for the modern engine rebuilder who wants to develop and modernize the working methods of his workshop and automate and improve the process of boring and surfacing engine blocks.

PROS AND CONS

Now let us see what the PROs and CONs are for the modern engine rebuilder who decides to go for the Comec ACF200-CNC cylinder boring and resurfacing machine.

TECHNICAL DATA

STANDARD EQUIPMENT

• Numerical control with LINUX operating system and ARMv8 CPU processor
• Precision ball screws on the 3 axes
• 3 axes motion on linear guides
• Brushless motors on 3 CNC controlled axes
• Dual touch-screen adjustable control panel
• Electronic handwheel for manual movement of 3 axes
• Automatic boring and face milling cycles and programming
• WI-FI and LAN connection for remote support
• PV0160 – Pair of flat supports for cylinder head fixtures
• PV0021 – No. 2 large fixing clamps
• PV0022 – No. 2 small fixing clamps
• Service wrench set
• Instruction manual

OPTIONALS AND ACCESSORIES

• UT1330 – ½” tool holder cartridge
• UT1355 – ½” CBN insert for cast iron
• UT1356 – ½” PCD insert for aluminum
• UT1320 – ⅜” tool holder cartridge
• UT1345 – ⅜” CBN insert for cast iron
• UT1346 – ⅜” PCD insert for aluminum
• UT1390 – ALP insert holder cartridge
• UT1392 – ALP insert for aluminum with pre-chambers
• B03560 – Boring kit Ø 35÷60 mm L= 330 mm with dial indicator system
• B06085 – Boring kit Ø 60÷85 mm L= 320 mm with dial indicator system
• B85170 – Boring kit Ø 85÷170 mm L= 360 mm with dial indicator system
• C03560 – Boring kit Ø 35÷60 mm L= 330 mm with pre-setting system
• C06085 – Boring kit Ø 60÷85 mm L= 320 mm with pre-setting system
• C85170 – Boring kit Ø 85÷170 mm L= 360 mm with pre-setting system
• PF0350 – Ø 350 mm milling plate with ½” CBN/PCD insert
• APC040 – Mill plate hub with ISO40 connection
• PV0025 – Pair of fast clamping column
• PV0160 – Pair of flat supports for cylinder head fixtures
• PVB015 – V-block adjustable universal fixture
• PV1516 – 60° – 90° V-block blueprinting mounting fixture
• SSR200 – Storage rack for spindles
• ACF500 – Tool sharpener complete with tool stand and diamond grinding wheel

VIDEO

DOWNLOAD

COMEC ACF200 CNC – CNC CYLINDER BORING AND RESURFACING MACHINE