PEG 8 is a compact valve seat grinder which allows the machining of engine valve seats with a diameter between Ø 16 and 48 mm.
PEG 8 is supplied in 4 versions, according to the accessories supplied with the machine.
PEG 8 is a motor valve seats grinding machine that works according to a planetary system. Thanks to an abrasive wheel, it allows the grinding of engine valve seats with diameters between 16 and 48 millimeters.
The machine works with the combined effect of three grinding movements that ensure the correct alignment of the system:
Thanks to the combination of these 3 movements, the valve seat adjustment system is always perfectly aligned, thus minimizing the possibility of error due to the coupling of the components.
The PEG 8 valve seat grinding machine is assembled with high quality ground parts, such as the spindle, eccentric shaft and pilot pin.
To avoid the appearance of axial or radial play clearances, all the components involved during the rotation phase are subject to a careful and precise balancing and recording of the constructional assemblies.
The high quality of the assembled parts and the remarkable constructive attention, give the machine an extreme precision and a long life.
All this accuracy reserved for the construction and control phase results in an excellent processing standard that makes the rectifier happy with its valve seat grinding machine.
A rich series of accessories that varies according to the version chosen by the user completes the machine.
The PEG 8 is supplied in 4 different variants, Standard, Univer, Motorized Unit Only, Avio, which differ from each other in the composition of the range of accessories supplied with the machine.
Furthermore, the Avio version is a variant of the PEG 8 which includes an increased length spindle that allows the rectification of blind cylinders used in aircraft engines or armored vehicles.
|Working field||Ø 16÷48 mm|
|Grinding wheel rotation speed||13000 Rpm|
|Relative motion||30 Rpm|
|Fixed eccentricity||1,5 mm|
|Motor power||250 W|
|Electrical requirements||230V 1Ph|
|Dimensions||25 × 9 cm|
PEG 8 Standard
PEG 8 Univer
PEG 8 Motor unit only
PEG 8 Avio
PEG 8 – VALVE SEAT GRINDER
PEG CATALOG ENG