Supercombintata SC3 – Portable Line Boring Ø 62÷800 mm
Supercombinata SC3 is a portable and multifunctional boring machine for internal and external boring and welding operations and it can be carried out directly on the job site thanks to its great portability and mobility qualities.
DESCRIPTION
The SC3 ranges between Ø 62÷800 mm, diameters that can be obtained through a rich series of accessories supplied with the standard equipment of the machine.
Thanks to the various set-ups, the SC3 can also carry out drilling, threading and tapping operations.
It’s also possible to equip this line boring machine with additional extra-kits that extend the range of applications, allowing internal boring operations, facing of orthogonal planes and the creation of circlip rings.
All these setting and versatility features, make the SC3 an extremely universal and functional line boring and welding machine.
TECHNICAL DATA
| Boring bar diameter | Ø 60 mm |
| Boring bar length | 2200 mm |
| Min. – Max. internal boring diameter | Ø 62 ÷ 800 mm |
| Min. – Max. external boring diameter | Extra kit |
| Min. – Max. internal welding diameter | Ø 42 ÷ 800 mm |
| Min. – Max. external welding diameter | Ø 42 ÷ 600 mm |
| Drilling operation | Suitable |
| Tapping operation | Suitable |
| Threading operation | Extra kit |
| Orthogonal planes facing operation | Extra kit |
| Longitudinal stroke pitch | 350 mm |
| Max. torque on the tool bar | 902 Nm |
| Boring bar rotation speed | 55 – 85 – 240 – 375 RPM |
| Max. feed speed | 11 RPM |
| Spindle motor power | 2,3 kW |
| Feed motor power | 0,1 kW |
| Electrical requirements | 220 V – 50 Hz – 1 Ph |
| Spiral welding | Continuous with variable step |
| Welding machine | Compatible with MIG/MAG welder with EURO connector |
| Dimensions | 68 × 30 × 39 cm |
| Weight | 39 Kg |
STANDARD EQUIPMENT
- Nr. 1 main unit
- Nr. 1 boring machine stand
- Nr. 1 electronic control panel
- Nr. 1 control panel holder
- Nr. 1 cable control panel/machine
- Nr. 1 power cable 220 V
- Nr. 1 boring bar Ø 60×2200 mm
- Nr. 1 boring bar extension 520 mm
- Nr. 1 extension locking pin
- Nr. 1 tool holder for boring Ø 120÷250 mm
- Nr. 1 tool holder for boring Ø 250÷800 mm
- Nr. 1 tool holder left Ø 12×50 mm
- Nr. 1 tool holder left Ø 12×60 mm
- Nr. 1 special tool holder left Ø 12×60 mm
- Nr. 1 tool holder left Ø 12×80 mm
- Nr. 1 tool holder right Ø 12×100 mm
- Nr. 1 box with 10 cutting inserts
- Nr. 1 cutting tool adjusting ring
- Nr. 2 main bar support
- Nr. 2 additional support
- Nr. 18 bracket for flanges 200 mm
- Nr. 18 bracket for flanges 275 mm
- Nr. 4 flange support Ø 250÷800 mm
- Nr. 1 telescopic shaft for welding
- Nr. 1 towing torch reduction bushing
- Nr. 1 locking torch reduction bushing
- Nr. 5 diffusor extension 35 mm
- Nr. 3 diffusor extension 100 mm
- Nr. 4 short gas nozzle
- Nr. 4 long gas nozzle
- Nr. 5 short contact tip Ø 0,8 mm wire
- Nr. 5 long contact tip Ø 0,8 mm wire
- Nr. 1 O-ring for welding shaft 100×5 mm
- Nr. 1 terminal lance for external welding
- Nr. 1 centring system Ø 250÷800 mm
- Nr. 1 centring system for through holes
- Nr. 1 centring system for blind holes
- Nr. 1 telescopic gauge up to Ø 800 mm
- Nr. 1 dial gauge
- Nr. 1 dial gauge support
- Nr. 1 set of wrenches
- Nr. 1 screws and bolts
OPTIONALS AND ACCESSORIES
- KEP00594 – Boring reduction kit Ø 22÷44 mm
- KEP00593 – Boring reduction kit Ø 32÷70 mm
- KEP00688 – Boring reduction kit Ø 42÷160 mm
- KEP00687 – Boring reduction kit for KES00186/KES00200
- KES00186 – Facing kit Ø 48÷255 mm (by using KEP00687)
- KES00200 – Facing kit Ø 56÷400 mm (by using KEP00687)
- KES00363 – Facing kit Ø 228÷500 mm
- KES00364 – Facing kit Ø 376÷800 mm
- KFL00927 – Internal threading kit Ø 120÷350 mm
- KEL00202 – Od machining kit Ø 100÷200 mm – L. 200 mm
- KEL00203 – Od machining kit Ø 150÷300 mm – L. 300 mm
- KED00366 – Big diameters kit Ø 800÷1200 mm
- AE001027 – Boring bar Ø 60×1500 mm
- AE003014 – Boring bar Ø 60×3000 mm
- AE030025 – Boring bar Ø 60×1100 mm
- AE030026 – Boring bar Ø 60×2200 mm with double taper
- AE003015 – Boring bar Ø 60×3000 mm with double taper
- AE000443 – Morse taper attachment 4 mm
- AE000441 – External joint for boring bar Ø 60 mm
- AE000442 – Internal joint for boring bar Ø 60 mm
- GC35SC – Internal support Ø 200÷300 mm
- GC39SC – Set of 2 centring cones Ø 135÷225 mm
- SG00127 – Terminal lance Ø 30÷50 mm
- COT90201 – Long contact tip Ø 1,0 mm
- COT90202 – Short contact tip Ø 1,0 mm
