Supercombintata SC2 – Line Boring Ø 62÷600 mm and External Overlay Welding
The Supercombinata SC2 is a portable line boring machine, expressly designed for boring and overlay welding on-site operations.
DESCRIPTION
Thanks to the standard accessories supplied with this boring machine, it is possible to carry out internal boring works with a capacity of Ø 62÷600 mm, as well as internal and external welding overlay.
The Supercombinata SC2 is already set up to allow the operator to carry out drilling and tapping works.
The possibilities of use that the Supercombinata SC2 offers also extends to external line boring, facing of orthogonal planes and creation of circlips grooves, through the addition of extra equipment that widens the range of use of this boring machine, making it an extremely efficient multifunctional machine.
TECHNICAL DATA
| Boring bar diameter | Ø 60 mm |
| Boring bar length | 2200 mm |
| Min. – Max. internal boring diameter | Ø 62 ÷ 600 mm |
| Min. – Max. external boring diameter | Extra kit |
| Min. – Max. internal welding diameter | Ø 42 ÷ 600 mm |
| Min. – Max. external welding diameter | Ø 42 ÷ 400 mm |
| Drilling operation | Suitable |
| Tapping operation | Suitable |
| Threading operation | Extra kit |
| Orthogonal planes facing operation | Extra kit |
| Longitudinal stroke pitch | 350 mm |
| Max. torque on the tool bar | 520 Nm |
| No. of rotation gears | 4 gears |
| Max. feed speed | 11 RPM |
| Spindle motor power | 1,8 kW |
| Feed motor power | 0,1 kW |
| Electrical requirements | 220 V – 50 Hz – 1 Ph |
| Spiral welding | Continuous with variable step |
| Welding machine | Compatible with MIG/MAG welder with EURO connector |
| Dimensions | 68 × 24 × 38 cm |
| Weight | 36 Kg |
STANDARD EQUIPMENT
- Nr. 1 main unit
- Nr. 1 boring machine stand
- Nr. 1 electronic control panel
- Nr. 1 control panel holder
- Nr. 1 cable control panel/machine
- Nr. 1 power cable 220V
- Nr. 1 boring bar Ø 60×2200 mm
- Nr. 1 boring bar extension 520 mm
- Nr. 1 extension locking pin
- Nr. 1 tool holder for boring Ø 120÷250 mm
- Nr. 1 tool holder for boring Ø 250÷600 mm
- Nr. 1 tool holder left Ø 12×50 mm
- Nr. 1 tool holder left Ø 12×60 mm
- Nr. 1 special tool holder left Ø 12×60 mm
- Nr. 1 tool holder left Ø 12×80 mm
- Nr. 1 tool holder right Ø 12×100 mm
- Nr. 1 box with 10 cutting inserts
- Nr. 1 cutting tool adjusting ring
- Nr. 2 main bar support
- Nr. 2 additional support
- Nr. 18 bracket for flanges
- Nr. 4 flange support Ø 250÷600 mm
- Nr. 1 telescopic shaft for welding
- Nr. 1 towing torch reduction bushing
- Nr. 1 locking torch reduction bushing
- Nr. 5 diffusor extension 35 mm
- Nr. 3 diffusor extension 100 mm
- Nr. 4 short gas nozzle
- Nr. 4 long gas nozzle
- Nr. 5 short contact tip Ø 0,8 mm wire
- Nr. 5 long contact tip Ø 0,8 mm wire
- Nr. 1 O-ring for welding shaft 100×5 mm
- Nr. 1 terminal lance for external welding
- Nr. 1 centring system Ø 250÷600 mm
- Nr. 1 centring system for through holes
- Nr. 1 centring system for blind holes
- Nr. 1 telescopic gauge up to Ø 600 mm
- Nr. 1 dial gauge
- Nr. 1 dial gauge support
- Nr. 1 set of wrenches
- Nr. 1 screws and bolts
OPTIONALS AND ACCESSORIES
- KEP00594 – Boring reduction kit Ø 22÷44 mm
- KEP00593 – Boring reduction kit Ø 32÷70 mm
- KEP00688 – Boring reduction kit Ø 42÷160 mm
- KEP00687 – Boring reduction kit for KES00186/KES00200
- KES00186 – Facing kit Ø 48÷255 mm
- KES00200 – Facing kit Ø 56÷400 mm
- KES00363 – Facing kit Ø 228÷500 mm
- KFL00927 – Internal threading kit Ø 120÷350 mm
- KEL00202 – Od machining kit Ø 100÷200 mm – L. 200 mm
- KEL00203 – Od machining kit Ø 150÷300 mm – L. 300 mm
- KED00360 – Big diameters kit Ø 600÷800 mm
- AE030025 – Boring bar Ø 60×1100 mm
- AE001027 – Boring bar Ø 60×1500 mm
- AE003014 – Boring bar Ø 60×3000 mm
- AE030026 – Boring bar Ø 60×2200 mm with double taper
- AE003015 – Boring bar Ø 60×3000 mm with double taper
- AE000443 – Morse taper attachment 4 mm
- AE000442 – Internal joint for boring bar Ø 60 mm
- AE000441 – External joint for boring bar Ø 60 mm
- GC35SC – Internal support Ø 200÷300 mm
- GC39SC – Set of 2 centring cones Ø 135÷225 mm
- SG00127 – Terminal lance Ø 30÷50 mm
- COT90201 – Long contact tip Ø 1,0 mm
- COT90202 – Short contact tip Ø 1,0 mm
