STC 330 – Swing Head Resurfacing Machine
The BO Machine Tools STC 330 is a resurfacing machine for engine heads with the typical “flag” movement of the head.
Compact and extremely functional, it allows both processing with grinding stones and coolant or milling by the cutting tool.
The BO Machine Tools STC 330 is an extremely versatile and easy to use cylinder head resurfacing machine.
It is suitable for engine rebuilding workshops that need a compact, reliable and durable resurfacer.
The main unit, composed by table, column and head, is made of solid spheroidal cast iron and rests on a sturdy sheet metal base.
Its typical “flag” movement covers the processing of cast iron and aluminum heads on surfaces ranging from approximately 300×300 to 800×100 mm
The machine is equipped with both grinding stones and coolant system and PCD/CBN tool, thus allowing maximum operator functionality.
All the controls are located on a convenient front control panel.
The BO Machine Tools STC 330 is supplied by default, with the grinding wheel – variable rotation speed, variable feed speed and automatic reversal system.
|Table surface||670×270 mm|
|Max. distance table – grinding wheel||330 mm|
|Grinding wheel vertical travel||205 mm|
|Grinding stones plate diameter||Ø 330 mm / 14″|
|Grinding wheel variable rotation speed||700÷1500 RPM|
|Variable feed speed||10÷145 mm/min|
|Grinding wheel motor power||2,2 kW|
|Feed motor power||0,11 kW|
- Sheet metal base
- Built-in cooling system
- Grinding wheel with a set of stones for cast iron
- Splash and safety shield
- Grinding stones dressing unit
- Grinding stones dressing diamond
- Cylinder head cutting tool
- Pair of parallel supports
- Locking clamps
- Set of wrench
- Instruction manual