DG8 and DG9 are part washers with manual action of the DG series produced by Magido. The manual parts washing machines of the DG series are mainly indicated for washing up to 45° of medium and small parts.
DG8 – DG9
The Magido DG8 and DG9 parts washers for workshops belong to the DG Series and have been specifically designed for washing small and medium-sized parts.
They are made of AISI 304 stainless steel which protect them from rust and wear and allow washing with a water-based solution at 45° C operating temperature.
The flow of the cleaning solution reaches the washing brush by means of a pump that the operator can activate through a comfortable pedal.
The cleaning solution is electronically heated and is regulated by a thermostat and can be constantly monitored through a level indicator.
In addition, on both models of the DG series, the upper worktop is removable to ease cleaning and maintenance the Magido DG8 and DG9 parts washing machines.
|Useful working width||mm||840||840|
|Useful working depth||mm||450||450|
|Useful working height||mm||400||400|
|Max weight capacity||Kg||40||40|
|Washing tank capacity||Lt||100||130|
|Wash pump pressure||Bar||0,2||0,2|
|Electrical requirements||V – Hz – Ph||230 – 50 – 1||230 – 50 – 1|
MAGIDO DG8 DG9 MANUAL HOT WATER PARTS WASHER
MAGIDO GENERAL CATALOG