The BO Machine Tools BT6-VS is a horizontal boring machine for the reconditioning of camshaft seats and crankshaft seats of engine blocks.
In spite of its rather small dimensions, the BT6-VS offers a very wide boring range from Ø 24÷85 mm, which can be further extended by means of special accessories.
The possibility of housing cylinder heads and blocks up to 810 mm in length makes it extremely versatile for machining any engine, whether In-Line or V-Shaped.
The BO Machine Tools BT6-VS is a horizontal boring machine for machining camshaft seats or crankshafts seats of engine blocks.
Its extreme versatility and practicality make it the ideal machine for the reconditioning of shaft seats, whether for In-Line or V-Shaped engines.
The supporting structure of the horizontal boring machine BT6-VS is represented by a sturdy frame, made of electro-welded steel, which in turn rests on a solid sheet metal base.
The sheet metal base, thanks to a convenient door, also serves as a storage compartment for all the numerous tools and accessories that this line boring machine includes in its standard equipment.
In the upper part, we find the horizontal sliding crossbar that is finely rectified to allow the perfect sliding of the bar support arms.
In order to guarantee a millesimal alignment between the holes of the bar support arms, these are made during the construction phase of the machine, making any possible margin of error practically nil.
This fundamental characteristic must be specified, as it allows an almost perfect alignment of the holes and an extremely precise rotation of the bar.
A correct system without backlash or misalignment determines the real quality of the machine, which is reflected in the quality and precision of the work performed.
All supporting arms are equipped with a quick release lever that allows quick positioning and locking along the upper sliding crossbar.
The head support cradle on which the locking parallels rest is made of solid hardened and ground steel.
The numerous adjustments offered by the BT6-VS horizontal boring machine allow for a very wide range of machining operations.
In fact, the BT6-VS can accommodate engine blocks and cylinder heads up to 810 mm in length and allows a boring range of Ø 24÷85 mm.
Many other settings allow the operator to get the best performances from this machine.
We can mention the variable bar rotation speed from 215÷1300 RPM and the variable feed speed from 0÷1000 mm/min.
A powerful 1.1 kW motor completes the construction of the BT6-VS.
All controls are housed on a practical control panel located on the right side of the operator.
We can therefore find:
The BO Machine Tools BT6-VS comes with an extensive set of accessories and tools that make it immediately usable by the operator.
The standard set of accessories includes:
Although the BO Machine Tools BT6-VS is already well equipped with a rich basic equipment, there are many optional accessories and tools that allow you to extend the machining range of this linear boring machine.
Users can therefore customize and extend the BT6-VS’s range of use, according to their specific needs.
The BT6-VS horizontal boring machine for cylinder heads and blocks is supplied in both 400V three-phase and 200V single-phase versions to meet the different electrical requirements in force in the various countries.
|Boring range||Ø 24÷85 mm|
|Max. spindle traverse||100 mm|
|Min. – Max. distance supports to bar||45÷295 mm|
|Max. heads and blocks lenght||810 mm|
|Max. cylinder head width||300 mm|
|Spindle variable rotation speed||215÷1300 RPM|
|Variable feed speed||0÷1000 mm/min|
|Spindle motor power||1,1 kW|
|Electrical requirements||400V 50/60Hz – 220V 50/60Hz|